Securitex Anti Intrusion Division

Active IR (infrared) perimeter protections


2PH150A (1 double beam)
2PH150A (1 double beam)
The PH line is a series of active infra-red barriers that is ideal for protecting large internal or external perimeter areas. It is made up of a barrier with max external range of 60 m and 1 double beam IR; by a barrier with max external range of 150 m and 1 double beam IR; and by a barrier with max external range of 200 m and 2 double beams. They can operate on 4 different frequencies selectable with dip switches, fitted with high quality aspheric lenses and a box with gaskets which makes them ideal for external installations on a pole (brackets supplied).
  • Nominal range internal 300 m, external 150 m
  • 1 double-beam I.R.
  • transmissions selectable on 4 different frequencies
  • no synchronism connection
  • automatic gain control (AGC)
  • high precision aspheric lenses
  • view finder for optical alignment with micrometric adjustment
  • beam adjustment from 0° to 180°
  • beam interruption time adjustment
  • standalone or INFRA column use

Technical specifications

 
Power supply 10.5-28 Vdc
Absorption 55 mA
Relay Intervention time from 50 to 700 ms
Detection mode Interruption of both beams
Output relay 1 alarm N.O. /N.C. - Range 0.2 A -30 VDC
1 tamper N.O. /N.C. - Range 0.2 A -30 VDC
Adjustment angle horizontal 0 - 180° - vertical ± 10°
Cable diameter 2 x 0.75 mm2 for 5 m - 2 x 2.5 mm2 for 150 m
Signal Cable diameter 2 x 0.22 mm2 for 150 m of cable
Protection rating IP 55
Operating temperature from -20° to +55° C
Dimensions and weight 100 x 247 x 100 mm - 1800 g
2PH60C (1 double beam)

2PH60C (1 double beam)
The PH line is a series of active infra-red barriers that is ideal for protecting large internal or external perimeter areas. It is made up of a barrier with max external range of 60 m and 1 double beam IR; by a barrier with max external range of 150 m and 1 double beam IR; and by a barrier with max external range of 200 m and 2 double beams. They can operate on 4 different frequencies selectable with dip switches, fitted with high quality aspheric lenses and a box with gaskets which makes them ideal for external installations on a pole (brackets supplied).
  • Nominal range internal120 m, external 60 m
  • 1 double beam I.R.
  • transmissions selectable on 4 different frequencies
  • no synchronism connection
  • automatic gain control (AGC)
  • high precision aspheric lenses
  • view finder for optical alignment with micrometric adjustment
  • beam adjustment from 0° to 180°
  • beam interruption time adjustment
  • standalone or INFRA column use

Technical specifications

 
Power supply 10.5-28 Vdc
Absorption 45 mA
Relay Intervention time from 50 to 700 ms
Detection mode interruption of both beams
Output relay 1 alarm N.O. /N.C. - Range 0.2 A -30 VDC
1 tamper N.O. /N.C. - Range 0.2 A -30 VDC
Adjustment angle horizontal 0 - 180° - vertical ± 10°
Cable diameter Power supply 2 x 0.75 mm2 for 5 m - 2 x 2.5 mm2 for 150 m
Signal Cable diameter 2 x 0.22 mm2 for 150 m of cable
Protection rating IP 55
Operating temperature from -20° to +55° C
Dimensions and weight 75 x 180 x 75 mm - 1100 g

4PH200A (2 double beams)
4PH200A (2 double beams)
The PH line is a series of active infra-red barriers that is ideal for protecting large internal or external perimeter areas. It is made up of a barrier with max external range of 60 m and 1 double beam IR; by a barrier with max external range of 150 m and 1 double beam IR; and by a barrier with max external range of 200 m and 2 double beams. They can operate on 4 different frequencies selectable with dip switches, fitted with high quality aspheric lenses and a box with gaskets which makes them ideal for external installations on a pole (brackets supplied).
  • Nominal range internal 500 m, external 250 m
  • 2 double beams I.R.
  • transmissions selectable on 4 different frequencies
  • no synchronism wire
  • disqualification device output
  • double view finder for optical alignment with micrometric adjustment
  • beam adjustment from 0° to 180°
  • beam interruption time adjustment
  • standalone or INFRA column use
Technical specifications  
Power supply 10.5-28 Vdc
Absorption 77 mA
Relay Intervention time from 50 to 700 ms
Detection mode Interruption of the 4 beams
Output relay 1 alarm N.O. /N.C. - Range 0.2 A -30 VDC
1 disqualification device N.O. /N.C. - Range 0.2 A -30 VDC
1 tamper N.O. /N.C. - Range 0.2 A -30 VDC
Adjustment angle horizontal 0 - 180° - vertical ± 10°
Cable diameter Power supply 2 x 0.75 mm2 for 5 m - 2 x 2.5 mm2 for 150 m
Signal Cable diameter 2 x 0.22 mm2 for 150 m of cable
Protection rating IP 55
Operating temperature from -20° to +55° C
Dimensions and weight 100 x 390 x 100 mm - 3700 g

BIRAY200S (2 beams)
BIRAY200S (2 beams)
BIRAY200S is a barrier with two double beams that is ideal for protecting large internal or external perimeter areas. With its user adjustable operating frequencies allowing more than one barrier on the same site without interference the BIRAY200S is ideal for long distance outdoor perimeter security. The BIRAY200S is fitted with a thermostatic circuit for cold climate use as well as an alignment visor for easy alignment over long distances.
  • Nominal range internal 500 m, external 200 m
  • transmissions selectable on 4 different frequencies
  • no synchronism connection
  • view finder for optical alignment with micrometric adjustment
  • integrated disqualification device and thermo stating
  • codified and modulated infrared signal system
  • extractable terminal boards
  • possibility o inserting elements for balanced lines
  • INFRA column use
  • separate electronics management and optical parts
Technical specifications  
Power supply 12 Vac/dc
Thermo stating power supply 12-24 Vac/dc
Nominal Absorption 75 mA
Absorption with thermo stating 340 mA
Detection mode Interruption of the 4 beams
Relay Intervention time from 50 to 700 ms
Disqualification device reply time 1 minute
Alarm duration 4 s
Output relay 1 alarm - Range 30 VDC - 500 mA
1 tamper - Range 30 VDC - 50 mA
Power supply Cable diameter 2 x 0.75 mm2 per 5 m - 2 x 2.5 mm2 per 150 m
Signal Cable diameter 2 x 0.22 mm2 for 150 m of cable
Protection rating IP 33 - IP 65 in INFRA column
Operating temperature da -20° a +55° C
Dimensions and weight 70 x 360 x 600 mm - 1200 g

IOR5MS (1 beam)
IOR5MS (1 beam)
IOR5MS is a synchronized or non synchronized active infrared barrier, suitable for internal or external, single or multiple beam perimeter protections Three previous models have been incorporated in a single product: the version for a non synchronized single beam (IOR2), the synchronized master barrier (IOR4M) and the synchronized Slave barrier (IOR4S). In multiple installations, up to 5 pairs of IOR5MS can be connected in the same column (10 pairs with TX and RX inverted) thanks to the Master and Slave functioning.
  • nominal range internal 150 m, external 40 m
  • master-Slave operating mode selectable with a dip switch
  • synchronized or non synchronized operation selectable with jumper
  • line synchronism 
  • beam adjustment with mirror from 0° to 180°
  • removable terminal boards
  • use in INFRA column or stand alone
Technical specifications  
Power supply 12-24 Vac/dc
Absorption 60 mA
Wavelength I.R. 950 nm
Relay Intervention time da 30 a 300 ms
Alarm duration 4 s
Output relay 1 N.C. - portata 1 A - 24 Vdc
Adjustment angle horizontal 0 - 180° - vertical ± 10°
Cable diameter Power supply 2 x 0.75 mm2 for 5 m - 2 x 2.5 mm2 for 150 m
Signal Cable diameter 2 x 0.22 mm2 for 150 m of cable
Protection rating IP 55
Operating temperature from -20° to +55° C
Dimensions and weight 127 x 60 x 55 mm - 410 g

KINFRA500 (2 beams)
KINFRA500 (2 beams)
The KINFRA500 kit is cabled and a pre-assembled for your convenience. Consisting of a KINFRA500 in an INFRA05 column (0.5m) these barriers are ideal for internal and external perimeter areas (anti-intrusion). Based on the type of connection of the normally closed relay contacts the alarm can be activated at the terminal board with the activation of just one beam or both
  • Nominal Range internal 150 m, external 40 m .
Kit consisting of:
  • 1 main barrier synchronized to infrareds IOR5MS (TX-RX)
  • 1 secondary barrier synchronized to infrareds IOR5MS (TX-RX)
  • 1 INFRA05 column with upper and lower cap
  • 4 tamper-resistant tamper
  • 4 supports for wall fixing cod. SUPINFRA
  • 4 anti-condensation elements
Technical specifications  
Power supply: 12-24 Vac/dc
Absorption: 120 mA
Wavelength I.R.: 950 nm
Relay Intervention time: from 30 to 300 ms
Alarm duration: 4 s
Output relay: 2 N.C. - Range 1 A - 24 VDC
Adjustment angle: horizontal 0 - 180° - vertical ± 10°°
Power supply Cable diameter: 2 x 0.75 mm2 for 5 m - 2 x 2.5 mm2 for 150 m
Signal Cable diameter: 2 x 0.22 mm2 for 150 m of cable
Protection rating: IP 55
Operating temperature: from -20° to +55° C
Dimensions and weight: 100 x 500 x 100 mm - 4000 g

To contact our sales and technical department please call 65-67852171 or email: sales@securitex.com.sg

Securitex Electronic Systems Engineering 
Block 9010 Tampines St 93 #04-145 Tampines Industrial Park A Singapore 528844 Tel: 65-67852171 Fax: 65-65850107

(Date Created: 03 November 2008)