Securitex 3G Remote Controller Terminal & SMS controller
0-5VDC. 0-20mA. 4-20mA. temperature & humidity
APPROVED BY IMDA SINGAPORE Registration number: S0232-17
What is Securitex Industrial Remote Controller SIRC272W-IG 3G Remote Controller Terminal.
The 3G M2M RCT (Remote Control Terminal) SIRC272W-IG 3G system that is incorporated with the QUECTEL UC15 module (Or WCDMA/CDMA2000) and ARM® Cortex™ 32 Bit RISC Core. It is a multi Isolation I/O port remote control terminal unit. It is use mainly for remote control of critical off site equipment and Remote Data Acquisition, Base Transceiver Stations Monitoring (BTSM), Access control, ATM monitoring, Generator Status Monitoring, Pump Station Monitoring, Weather Station Monitoring, Data Centre temperature/ humidity and power status monitoring and many other applications.
The SIRC272W-IG 3G M2M RCT is designed as a cost effective remote control system alert device. It monitors up to 8 digital inputs and 4 solid relay outputs and 6 Analogue inputs and Power Status, onsite Temperature and Humidity. All of the inputs and outputs are isolated. User-defined SMS is sent to pre-configure mobile phone numbers when a pre-defined alarm condition happen. The pre-configured mobile phone numbers can belong to technicians or engineers or anyone who are responsible in handling corresponding alarms and with the aid of this 3G M2M RCT, the alarm condition brings attention to in-charge personnel immediately. It also allows those mobile phone users if authorize to take corrective action they can trigger any relay output by using SMS to activate emergency equipment to mitigate the emergency condition, [example if temperature rises to a certain preset level at a Data center is detected the SMS receiver can turn on the standby air con or ventilation to cool down the premises etc]. The output can be connected with alarm indication device, such as alarm, and others. Moreover the 3G M2M RCT can be used as a smart PLC (Programmable Logical Controller) by the interlock function and be used as a remote access control, the authorized users can open the gate or turn on the machine with a free of charge call at specified time. The 3G M2M RCT supports Modbus TCP, TCP/UDP protocol, data transparent transmission via RS232 /RS485 ports over GPRS/3G network.
Some of the application areas could be (the list is however not limited to these application areas)
Security systems. Irrigation & fire alarm systems. Building surveillance and control. Home & garden automation projects. Heating, lighting & climate control Remote monitoring and device/equipment control. Medical equipment monitoring. Safety System monitoring and control. Plant and Refinery systems control & monitoring and Data Center etc.
@ 1996 -2018 Securitex Electronic Systems Engineering. All Rights Reserves. Securitex Electronic Systems Engineering Block 9010 Tampines St 93 #04-145 Tampines Industrial Park A Singapore 528844 Tel: +65 67852171 Fax: +65 65850107 Email: firstname.lastname@example.org