Securitex

Vandal proof keypad

 

Outdoor reader

 

UT-2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(Roger Access Control System)

Access Controller PR302
PR302 - Access Controller with Integrated Proximity & PIN Reader
 
Main Features
  • fully standalone or networked operation,
  • ABS plastic case, silicone rubber keypad, RTC clock, non violate memory,
  • RFID and/or PIN code identification,
  • three multipurpose NO/NC inputs,
  • two multipurpose 1A transistor outputs, electronically protected,
  • one relay output (form C contacts, 1.5A rated),
  • inputs and outputs controlled by time schedules,
  • 1000 or 4000 users (depends on firmware version),
  • four user types: Normal, Switcher full, Switcher limited and Master,
  • card usage limit definition,
  • non violate 48 000 events register,
  • 127 access groups,
  • 99 time schedules,
  • holiday definition,
  • [Door contact], [Exit button], [Forced entry], [Duress] and more function,
  • Soft or Hard mode anti-passback with reset schedule,
  • [Normal], [Locked], [Unlocked] and [Conditional Unlocked] door lock modes, each under schedule control,
  • [Card] or [Card+PIN] mode, both controlled by schedule,
  • special entry modes ([Card+Card] and [Conditional Access]) both under schedule control,
  • customer defined T&A registration modes,
  • T&A registration modes controlled manually from keypad, external line or by schedule,
  • integration with IAS (Intruder Alarm System) through SWITCH output,
  • Intruder Detection Input with automatic Arming/Disarming feature,
  • operation with remote access terminal (PRT series reader) on 150m distance,
  • firmware download mode,
  • 12VDC/80mA supply,
  • accepts UNIQUE (EM4001/2) cards,
  • 15 cm reading range for ISO card,
  • Windows 95/98/2K/NT/XP software, free for systems up to 8 doors,
  • SDK (Software Development Kit) with ActiveX (OCX) control,
  • comply with EN50133,
  • CE mark (available Q1/2004).
General Description

   The PR302 controller is dedicated for use in access control systems equipped with electric door lock. It has a built-in proximity reader and 12 digit keypad. PR302 offers three inputs, one relay output and two transistor outputs, inputs and outputs can be configured to several pre-defined functions. Controller can register up to 4000 users, every user can be identify by Card, PIN or both method at once. The reader which is integrated into controller accepts UNIQUE standard cards (EM4001/2) or compatible. Controller offers In Circuit Programming feature which enables firmware downloading into microprocessor memory. The PR302 controller can operate with one external identification terminal (reader) PRT series made by Roger (http://www.roger.pl/). Usually an additional identification terminal is used when both side door control is required or when controller unit must be located in protected area in order to avoid access of unauthorized person to controller electronics. PR302 can operate is standalone mode or in networked system, when running in standalone mode it records all events in its internal memory banks and offer the same functionality as in networked mode

Custom Firmware

   On special request Roger offers custom specified versions of firmware which can be download to controller during manufacturing process or after installation. The firmware downloading (flashing) doesn’t require any specialized programming cable, it use built-in RS485 interface (lines A and B) and requires Roger ISP program on downloading computer.


 
Technical Specification
Operating voltage range 10...16 VDC (recommended linear type power supply unit)
Current consumption avg. 80mA
Tamper normally closed contact
Reading range up to 15 cm for ISO card (depends on card quality)
Card type UNIQUE standard, ASK Modulation 125kHz (EM4001/2 compatible)
Operating temp. range 0...+55º C
Cable distance to optional identification terminal 150 meters (500 ft)
Cable distance between controller and CPR control panel or PC computer 1200 meters (4000 ft)
Operating humidity 0 to 95% (non condensing)
Ingress protection code IP30 (For internal use only, none water protection)
Dimensions (mm) 105 X 105 X 31 mm
Weight (grams) 175g
Ordering Information
PR302 Controller with keypad. A self-adhesive cover is delivered with new controller so installer may if needed remove keypad and replace it with plastic cover.
PR302bk Controller without keypad.

Securitex Electronic Systems Engineering 
Block 9010 Tampines St 93 #04-145 Tampines Industrial Park A Singapore 528844 Tel: 65-67852171 Fax: 65-67863351
mailto:autogate@secureciti.com

Indoor reader

 

 

Transponder ISO card

 

 

Transponder Thick