Auto-dialer SET Mode
Plug adaptor into power source.
Connect adaptor wire to the DC outlet on the back of auto-dialer.
Set the function switch to "SET" position.
Plug into plug "A" telephone line of telephone set.

Settings:

Set phone numbers for receiving messages
First number * + 1 + Telephone number + #
Second number * + 2 + Telephone number + #
Third number * + 3 + Telephone number + #

Set the phone number as the recorded outgoing message
* + 4 + Telephone number + #

Set the password
* + 5 + Password + # Operating through the phone

To unlock and open the door
Phone number + Password + 1

To lock the door
Phone number + Password + 2

To inquire lock status
Phone number + Password + 3

To monitor
Phone number + Password + 4

Auto-dialer EXE Mode
Upon completing auto-dialer's settings , remove the telephone line from plug "A".
Connect the dual plug to the telephone trunk line.
Connect the telephone line that was originally connected to plug "A" to one of the sockets on the dual plug.
Operational (Execution) Status
Connect the telephone trunk line from the dual plug to plug "B" of the auto-dialer.
Set the function switch to "EXE" position.
Connect the opposite end of telephone line from plug "B" to the other available socket on the dual plug (The auto-dialer is now operational.)

 

Securitex Electronic Systems Engineering
Block 9010 Tampines Street 93 #04-145
Tampines Industrial Park A
Singapore 528844 Tel: (65) 6785 2171 Fax: (65) 6786 3351
sales@securitex.com.sg